鞋面、大底SIZE、EVA劃線板型號要使用正確2、把鞋面與大底放入畫線

The model of upper, outsole SIZE and EVA scribing board should be used correctly <br>2. Put the upper and outsole into the line drawing machine, and the outsole should be placed on the number line of the EVA scribing board <br>3. Put it in the outsole, adjust the front and rear pressure levers, press the foot switch with the right foot, press the pressure lever to press the shoes, check the front and back, and use the silver pen to draw a vertical line on the shoe surface according to the arc of the outsole, keeping the line drawn The arc is consistent with the arc of the outsole <br>4. The pressure of the marking machine: 1.5-3.0kg/cm2, the outsole and the upper need to be equipped with double puts, the number is the same, the marking must be clear, and the line can not be repeated, changed, and all exposed widths must be matched Double <br>5, the center point of the heel of the upper and the heel of the outsole need to be aligned, and the upper must not be skewed

Shoe, large-base SIZE, EVA scratch plate models to use correctly<br>2, put the upper sits and large soles into the drawing machine, the large bottom press the number line on the EVA dashboard<br>3, put the upper layer into the large bottom, adjust the front and rear pressure rod, right foot step on the foot switch, pressure rod to press the shoe, check the front and rear correction, right hand with the silver pen according to the large bottom arc on the shoe vertical drawing line, to maintain the arc of the dashes and the large bottom arc consistent<br>4, dasher pressure: 1.5-3.0kg/cm2, large soles and uppers need to be paired, the number is consistent, the dash needs to be clear, not heavy line, re-wire, all exposed width narrow must be paired with a pair<br>5, the heel of the upper and the heel of the big bottom center point needs to be aligned, the upper face can not have a skewed

The model of vamp, outsole size and EVA scoring plate shall be used correctly<br>2. Put the vamp and outsole into the line drawing machine, and align the outsole according to the number line on the EVA marking board<br>3. Put the last vamp into the outsole, adjust the front and rear pressing levers, press the foot switch on the right foot, press the levers to press the shoes, check the front and back and put them straight, use the silver pen on the right hand to draw a line vertically on the vamp according to the curvature of the outsole, and keep the arc of the line consistent with that of the outsole<br>4. Pressure of marking machine: 1.5-3.0kg/cm2, the outsole and vamp shall be equipped with double laying, with the same number, and the marking shall be clear, no heavy line, change line, and all exposed width must be equipped with double laying<br>5. The center point of the heel of the upper and the heel of the outsole should be aligned, and the upper should not be skewed<br>