因外包品质问题成型推迟到4/18号1.鞋頭飾片印刷挪位，3D效果達不到

The molding was postponed to No. 4/18 due to the quality of outsourcing. <br>1. <br>The toe cap printing was shifted, and the 3D effect could not reach the confirmation shoe . 2. The toe cap embroidered pattern on the TPU cover was less than <br>1. Confirm the pair of the TPU printing. <br>2. Email verification and development <br>1.20 / <br>4/13 (already returned) Development No. 2.4 / 16 has been replied: due to shrinkage due to electric embroidery and Nosew, ± 2mm accepted

Due to outsourcing quality issues to form to 4/18<br>1. Shoe headdress print shift, 3D effect can not reach the confirmation shoes<br>2. Toe TPU cover electric embroidery pattern and confirmation shoes pair less<br>1. Re-stock TPU printing large and medium<br>2. Emailed for proof development<br>1.20/4/13 (back)<br>2.4/16 development has been restored: due to electro-embroidery and NOSEW head sheet, .2mm accepted

Due to outsourcing quality problems, the molding was postponed to April 18<br>1. The 3D effect of the printing move of the toe plate can't reach the confirmed shoes<br>2. The toe TPU cover electric embroidery pattern is not matched with the confirmed shoes<br>1. Prepare TPU printing again<br>2. Mail verification development<br>1.20/4/13 (returned)<br>2.4/16 development reply: due to the shrinkage of electric embroidery and nosew, ± 2mm accepted<br>