Other settings can be connected to the computer by USB when the BEC has been powered on, and can be unplugged directly after setting. The BEC does not need to be powered off.<br>The premise is that on Windows platform, vbar should be enabled and then plugged in, while on Mac platform, USB should be plugged in and then vbar should be run<br>The initializer is used in the following situations,<br>1. In the first setting<br>2. Vbar is used in case of abnormality after startup, such as disorderly jumping of cross disk.<br>3. After changing the use mode of the auxiliary channel, the spider tilts.<br>4. Other abnormal unknown conditions<br>In addition to enabling the initialization program after power on, you can also press the "cold start (recalibration)" in the middle right of the figure below after connecting the computer.<br>
正在翻译中..