從保溫箱內取出配套大底及鞋面2、按照胶线部位鞋头至后跟进行操作，刚好盖

Remove the supporting outsole and upper from the incubator <br>2. Follow the toe to heel of the rubber line, just cover the scribe or glue line, and use the horn to crush the upper part of the upper, do not use the horn to press the outsole <br>3. Bottom order: toe→inner and outer waist→heel→inner and outer waist4 <br>, vamp, outsole should be on the same side, same size, same color, not mixed side <br>5, bottom can not be skewed, point to the mark, not Wrinkling, curling, wrapping, misalignment, do not attach the upper and the outsole twice. <br>6. When pulling up the outsole, do not use excessive force to avoid the outsole deformation. Work with gloves and stick it on. Completed within one minute

Remove the matching large soles and uppers from the insulation box<br>2, according to the rubber part of the toe to the heel operation, just cover the line or glue line, the shoe meet with the bull's horn press dead, do not use the horn tip pressure large bottom<br>3, paste the order: toe, front palm inside and outside waist, heel, inside and outside waist<br>4, uppers, large soles should be the same edge, with SIZE, the same color, can not mix edge<br>5, the bottom can not be skewed, aligned with the mark point paste, can not wrinkle, curling edge, envelope, misplaced, the upper and large soles do not attach secondary<br>6, hand to pull the large bottom up, can not be too strong, so as not to elongate deformation, with gloves work and hot paste in one minute to complete

Take out the matching outsole and vamp from the incubator<br>2. Operate from the toe to the heel of the rubber thread part, just cover the scribing or rubber thread, and press the joint of the vamp with the horn instead of the horn to press the outsole<br>3. Sequence of sole sticking: toe → inside and outside waist of forefoot → heel → inside and outside waist<br>4. Vamp and outsole shall be of the same side, size and color, and the edges shall not be mixed<br>5. The bottom shall not be tilted, the mark point shall be aligned, wrinkle, curl, wind wrapping and dislocation shall not be allowed, and the upper and outsole shall not be fitted twice<br>6. When holding the outsole and pulling it up, do not use too much force to avoid the stretching and deformation of the outsole. Work with gloves and heat stick it in one minute<br>